This post may contain affiliate links. If you buy through links on this page, we may earn a commission at no extra cost to you.
As an Amazon Associate I earn from qualifying purchases.
Seedlings do best when the light turns on and off at the same time each day. A timer does that job for you, and it costs less than a tray of seedlings. Once you set it, the lights follow the same schedule seven days a week, even when you sleep in or leave town for a weekend.
This guide covers the two timer types most gardeners use, a 16-hour schedule that works for most seedlings, and the small mistakes that make a timer look broken when it is not. If you are still deciding how long the lights should run, read our guide on how long grow lights should stay on for seedlings first, then come back here to set the timer.
Why a timer beats switching lights by hand
Seedlings need a dark period each day. Iowa State University Extension advises 12 to 16 hours of bright light per day after germination, with the lights off for the rest of the day. A plant that gets light around the clock grows soft and stretched, and a plant that gets light at random hours never settles into a steady rhythm.
Hand switching fails in two ways. First, people forget. The lights stay on until bedtime, or they stay off until someone remembers at lunch. Second, the schedule shifts a little each day, so the plants get 14 hours one day and 18 the next. A timer removes both problems. You set the on and off times once, and the same schedule repeats every day.
A timer also protects your seedlings when you are away. A weekend trip no longer means two days of dark shelves or two days of lights left on. The timer keeps the routine while you are gone, and you come home to plants that look the same as when you left.
Mechanical timers: pins and dials
A mechanical timer is a round dial with small pins or segments around the edge. Each pin stands for a slice of the day, often 15 or 30 minutes. You push down the pins for the hours you want the light on and leave the rest up. The timer plugs into a wall outlet, and the grow light plugs into the timer.
To set one, turn the dial until the arrow points at the current time, then push down the pins for your on hours. For a 6 AM to 10 PM schedule, push down every pin between 6 and 22 on the dial. Plug the light in, and the timer will switch it on at 6 AM and off at 10 PM, every day, until you change the pins.

Mechanical timers have no battery and no screen, so there is nothing to program and nothing to go blank. That plain design is also their weak point. A power cut stops the dial, and when the power returns the timer runs late by the length of the outage. After any outage, check the dial against a clock and turn it back to the current time.
Before you buy, check the timer rating. Most plug-in timers handle 1,800 watts, which is far more than a shelf of seedling lights draws, but a timer built for lamps can carry a lower rating. Add up the watts printed on your light fixtures and keep the total under the number printed on the timer. You can browse mechanical plug-in timers on Amazon and compare the watt ratings listed for each model.
Digital timers: exact on and off times
A digital timer trades the dial for buttons and a small screen. You set the clock, then set an on time and an off time to the minute. Many models hold a 7-day program, so you can run one schedule on weekdays and a different one on weekends, though most seedling growers use the same schedule every day and never touch the weekly settings.
The main gain over a mechanical timer is exactness. You can set 6:00 AM on and 10:00 PM off, with no rounding to the nearest pin. The screen also shows the time, so you can see at a glance whether the timer agrees with the clock on the wall. Most digital timers keep their program on a small backup battery, so a short power cut does not wipe the settings.

Digital timers have their own traps. The most common is AM and PM. A timer set to turn on at 6:00 PM instead of 6:00 AM gives the seedlings a night shift and a dark morning. Check the small AM or PM mark on the screen before you save the program. The second trap is the manual override button. Many digital timers have a button that forces the outlet on or off until you press it again, and a stray press can leave the lights on all night. If the lights ignore the program, check that button first.
Digital timers also need their clock set before anything else. Set the clock, set the on time, set the off time, then watch one full cycle. Stand by at the off time and confirm the light goes dark. That one check catches most setup slips before they cost a week of bad light.
A sample schedule that works
Here is the schedule we use as a starting point for seedlings under a shop light or LED bar: lights on at 6 AM and off at 10 PM. That is 16 hours on and 8 hours off each day. Over a week, the seedlings get 16 times 7, or 112 hours of light, and 56 hours of dark.
The table below shows how the weekly total changes with the daily hours. All three rows sit inside the 12 to 16 hour range that Iowa State University Extension advises for seedlings after germination, with 18 hours shown for growers who run the top of the range in a dim room.
| Hours on per day | Hours off per day | Hours of light per week |
|---|---|---|
| 14 | 10 | 98 |
| 16 | 8 | 112 |
| 18 | 6 | 126 |
For a 4-tier shelf, the setup is simple. Each tier holds one light bar, and all four bars plug into one power strip. The power strip plugs into the timer, and the timer plugs into the wall. At 6 AM the timer powers the strip, all four bars come on together, and at 10 PM they all go dark together. The assumption here is that all four tiers hold seedlings at the same stage, so one schedule suits the whole shelf. If one tier holds new sprouts and another holds older plants, give each tier its own timer.

Start at 16 hours and watch the plants for a week. Short, sturdy stems and deep green leaves mean the schedule suits them. Pale, stretched stems point to light that is too weak or too far away, not to a schedule problem. Raising the hours to 18 will not fix a light that hangs too high. For the distance side of the setup, see our guide on how high grow lights should be above seedlings.
Keep the timer out of the watering zone. A timer that sits on the shelf under a tray can catch drips when you water, and a wet timer is a shorted timer. Mount it on the wall or on the side of the shelf, above the trays, where water cannot reach it.
When the timer seems broken
Most timer trouble comes from setup, not from a dead timer. Work through the list below before you buy a new one.
The light comes on at the wrong time
Check AM and PM first, then check the clock. On a mechanical timer, the dial may sit an hour or two off the real time after a power cut. Turn the dial to the current time and the schedule lines up again. On a digital timer, a wrong clock gives a wrong schedule in the same way, so set the clock and re-check the on and off times.
The light never turns off
On a mechanical timer, look for pins that are pushed down for the whole dial. One stray pin in the night hours keeps the light on. On a digital timer, look for a second on-time in the program, or a manual override that is stuck on. Clear the extra program and press the override button until the screen shows the timer is back in automatic mode.
The light never turns on
Check the outlet first. A timer plugged into a wall switch that someone turned off will never run, and a power strip with its own switch off blocks the timer too. Plug a lamp into the same outlet to test it. If the outlet works, check that the timer itself is switched on and that the light works when plugged straight into the wall.
The schedule drifts after a storm
A power cut stops a mechanical timer dead, so it runs late by the length of the outage. A digital timer with a backup battery keeps its program but may lose the clock. After any outage, check the clock on the timer and the on and off times, and reset them if they moved.
Troubleshooting
The timer clicks but the light stays dark
The timer is switching, so the fault sits past the timer. Check the bulb or the light fixture by plugging it straight into the wall. If it lights there, the timer outlet may be worn. Try the other outlet on the timer, if it has two, or swap in a different timer.
Seedlings lean toward one side of the shelf
Leaning points to uneven light, not to the timer. A bar that hangs off-center lights one side of the tray more than the other. Center the bar over the tray and turn the tray a quarter turn every few days so each side gets its share.
The timer hums or feels warm
A faint hum from a mechanical timer is normal, since the dial runs on a small motor. Heat is not. Unplug a timer that feels hot to the touch, and check the watt total of the lights plugged into it. A timer loaded past its rating can overheat, and that is a fire risk, not a quirk.
Frequently asked questions
Can one timer run two or more lights?
Yes, if the total watts stay under the timer rating. Plug the lights into a power strip, plug the strip into the timer, and add up the watts on the light labels. Most seedling bars draw 20 to 40 watts each, so four bars on one timer is well inside a 1,800-watt rating.
Do seedlings need light at night?
No. Seedlings need a dark period each day, and the extension guidance of 12 to 16 hours of light assumes the rest of the day is dark. Running the lights all night does not make seedlings grow faster, and it can leave them soft and pale.
What happens to the schedule in a power cut?
A mechanical timer stops and runs late by the length of the outage until you reset the dial. A digital timer with a backup battery usually keeps its program, but you should still check the clock after the power returns.
Can I use a smart plug instead of a timer?
Yes. A smart plug does the same job through a phone app, and it can follow a schedule without a dial or buttons. It needs a steady wifi connection to hold the schedule, so a plain plug-in timer is the safer pick for a shelf in a basement or garage with weak wifi. If you want a timer made for this job, see our roundup of the best timers for grow lights.
Sources and further reading
- Iowa State University Extension, Getting a Head Start: How to Successfully Start Seeds Indoors
- UMass Extension, Starting Seeds Indoors: Caring for Your Seedlings
- University of New Hampshire Extension, Starting Plants From Seed
Related reading: Best Timers for Grow Lights, How Long Should Grow Lights Stay On for Seedlings?, How High Should Grow Lights Be Above Seedlings?